Extron SIS
Simple Instruction Set is Extron’s command/response control language. Serial, Telnet-like and secure service mappings vary by product; SIS is not a single universal network port.
Scope: Extron SIS — requirements depend on the selected profile.
protocol · Catalog reviewed 2026-09-27
By Extron
ControlProprietary
Infrastructure Requirements
- The exact product command guide, supported transport and configured listener
- correct serial wiring where used
- authorized control credentials.
Network & Physical Requirements
| Port / allocation | Transport | Connection / signal flow | Feature and requirement | Evidence |
|---|---|---|---|---|
| 23 (default) | TCP | Third-party controller → Extron device | Optional · Legacy TCP SIS SIS socket control FOX Matrix example; confirm model configuration | Source checked 2026-09-27 Programming Guide > Ethernet (LAN) Port; Ethernet Connection (Telnet); telnet port command |
| 22023 | TCP | Third-party controller → NAVigator | Optional · NAVigator SIS NAVigator third-party SIS NAVigator revision F | Source checked 2026-09-27 NAVigator NAV LAN table, p. 2; OOB table, p. 4: TCP 22023 |
Physical, link and configuration requirements
physical · Optional · Serial SIS
Serial SIS uses the model’s documented electrical interface, baud/framing and command set.
Extron model-specific serial SIS
Source checked 2026-09-27
Rear Panel Features > Remote RS232/RS422 connector; Programming Guide > Serial Ports
Gotchas & IT Notes
- ⚠Use the actual model command reference and authentication settings. Do not apply legacy TCP 23 to every Extron product.